There are many systems in the market designed to tackle heat that is generated when machinery is in use or when environmental conditions are too hot. These mechanisms are very important as they make sure that equipment run smoothly and the environment within enclosed areas are kept at optimum conditions so that operations can go smoothly. However which temperature control tool to use is not an easy decision to make. There are many options to look at.From these available options, one popular option is Bowman heat exchanger or other forms of air coolers. This method uses a process to remove heat to the ambient air with the use of many tools and pipes. This is different, because unlike other cooling systems that use water, this relies on air. This mechanism is useful when other alternatives are not possible to use or cause a significant cost issue. These systems come in three main categories such as; Forced draft, induced draft and air- recirculation units. The machine is mainly made of a collection of finned tubes which operates when air is circulated across them with the use of fans. The level of air flow determines the level of temperature that is maintained. Let’s look at some of the benefits these mechanisms can offer households and industries.

Better than water: an air cooled heat exchanger helps to mitigate issues associated with water based methods. There is no need to consider piping requirements to carry water, which makes the whole systems far easier to install and maintain. There is also no need to focus on costs associated with the use of water. It also reduces environmental damage which is otherwise caused by thermal pollution and other chemicals that are used to treat the water sources that are used.

Controlling temperature is easier: unlike in other systems, the air cooled option allows for easier control of temperature. This reduces the need for complex control panels to monitor the systems’ performance. The controlling system is easy as shutting down one or two fans in operation. For other air coolers that use a process fluid it is as simple as adjusting the fluid, fan blades etc.

Easy maintenance and flexibility: ease of installation and maintenance is another big selling point for this type of system. They can be easily fitted in to any space within the plant location. They do not really require any re organizing or renovation to be done to the existing infrastructure. Another plus point is the relative low maintenance requirements. 

It is easy to see why this apparatus is most popular. Therefore if you are looking for a temperature control unit it is a good option to look at.